# Yamaha DM3 OSC control

**URL:** <https://forum.oscpilot.com/t/yamaha-dm3-osc-control/886>\
**Category:** OSC/PILOT General Discussion\
**Created:** [May 12, 2024, 8:04pm UTC](https://forum.oscpilot.com/t/yamaha-dm3-osc-control/886 "2024-05-12T20:04:50Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![ArttuH](https://avatars.discourse-cdn.com/v4/letter/a/b9e5f3/32.png) [@ArttuH](https://forum.oscpilot.com/u/ArttuH)\
**Post date:** [May 12, 2024, 8:04pm UTC](https://forum.oscpilot.com/t/yamaha-dm3-osc-control/886/1 "2024-05-12T20:04:50Z")

</div>

Hi all,

I´m a total beginner with OSC so please be patient.

I have tried to apply OSC control between OSC Pilot and Yamaha DM3 audio console. Yamaha has a OSC tutorial (for Qlab) and I have tried to understand the OSC command line. When I copy the example command and add it to slider OCS Address it doesn´t do anything:

/yosc:req/set/MIXER:Current/InCh/Fader/Level/1/1 -32768

Network should be ok since I can ping DM3´s IP.  
Any tips or links for suitable tutorials?

Thanks!

Yamaha tutorial: [https://jp.yamaha.com/files/download/other\_assets/2/2063222/DM3\_osc\_specs\_v100\_en.pdf](https://jp.yamaha.com/files/download/other_assets/2/2063222/DM3_osc_specs_v100_en.pdf)

---

<div class="post-metadata">

**Author:** ![malcolm](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.oscpilot.com/malcolm/32/19_2.png) [@malcolm](https://forum.oscpilot.com/u/malcolm)\
**Post date:** [May 27, 2024, 5:32pm UTC](https://forum.oscpilot.com/t/yamaha-dm3-osc-control/886/2 "2024-05-27T17:32:23Z")

</div>

The /yosc:req/set/MIXER:Current/InCh/Fader/Level/1/1 would be the OSC Address, while -32768 is the value that they want sent.  
So you’d have to set your value to -32768 for a button to send that specific value, or change your slider range to have that as the low value (what do they want as the high value?)

---

<div class="post-metadata">

**Author:** ![ArttuH](https://avatars.discourse-cdn.com/v4/letter/a/b9e5f3/32.png) [@ArttuH](https://forum.oscpilot.com/u/ArttuH)\
**Post date:** [August 14, 2024, 2:13pm UTC](https://forum.oscpilot.com/t/yamaha-dm3-osc-control/886/3 "2024-08-14T14:13:26Z")

</div>

Hi Malcom,

That was just the example from Yamaha tutorial, which is the only DM3 specific OSC document that I know.

Problem is that I still don´t understand how to put that address and values to OSCPilot so that it would work with DM3.

For example, I would want to add a button that would toggle input channel 1 on and off.  
Yamaha OSC specs tell me this:

Input Channel Fader On set MIXER:Current/InCh/Fader/On 1 - Input Channel Num Input Channel 1 — i: integer 0 1 0: OFF, 1: ON

So if I follow the tutorial the address should be something like this :

/yosc:req/set/MIXER:Current/InCh/Fader/On 1

Line above doesn´t work when I copy it to OSC address line. So there must be something that I don´t understand here.