# RESOLVED: Controlling at least 2 sliders at once makes oscPILOT switch to editing mode **URL:** \ **Category:** OSC/PILOT Bugs And Feature Requests\ **Created:** [August 15, 2020, 1:49am UTC](https://forum.oscpilot.com/t/resolved-controlling-at-least-2-sliders-at-once-makes-oscpilot-switch-to-editing-mode/147 "2020-08-15T01:49:08Z")\ **Posts on this page:** 9\ **Page:** 1
**Author:** ![DrtyHvn](https://avatars.discourse-cdn.com/v4/letter/d/eb8c5e/32.png) [@DrtyHvn](https://forum.oscpilot.com/u/DrtyHvn)\ **Post date:** [August 15, 2020, 1:49am UTC](https://forum.oscpilot.com/t/resolved-controlling-at-least-2-sliders-at-once-makes-oscpilot-switch-to-editing-mode/147/1 "2020-08-15T01:49:08Z")
The program switches to editing mode if I perform multiple sliders at once. I can make this bug reappear if I pause a motion on one finger while the other is still sliding and than resume again. Version 97.3 and 98.2 ---
**Author:** ![malcolm](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.oscpilot.com/malcolm/32/19_2.png) [@malcolm](https://forum.oscpilot.com/u/malcolm)\ **Post date:** [August 18, 2020, 12:42am UTC](https://forum.oscpilot.com/t/resolved-controlling-at-least-2-sliders-at-once-makes-oscpilot-switch-to-editing-mode/147/2 "2020-08-18T00:42:17Z")
Hmm I can’t reproduce this. Entering edit mode should only occur when dragging down from the upper right of the window. What is your file like, and where are your mouse presses occuring? ---
**Author:** ![DrtyHvn](https://avatars.discourse-cdn.com/v4/letter/d/eb8c5e/32.png) [@DrtyHvn](https://forum.oscpilot.com/u/DrtyHvn)\ **Post date:** [August 18, 2020, 2:01am UTC](https://forum.oscpilot.com/t/resolved-controlling-at-least-2-sliders-at-once-makes-oscpilot-switch-to-editing-mode/147/3 "2020-08-18T02:01:49Z")
I tried sending a video via the email link but it won’t go through. So let me know if there’s an email address I can send it to if you’'d like. ![oscPilot](https://canada1.discourse-cdn.com/flex029/uploads/oscpilot/original/1X/083cf97caa63bc4df7298da5b8317f1e0f47bd89.jpeg) The picture shows the parameters off all the sliders. Once I enter Performance mode and slide my fingers on the widgets (in a complicated fashion) the program switches back to editing mode. The results occur no mater what part of the screen i’m fingering 😊 ---
**Author:** ![malcolm](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.oscpilot.com/malcolm/32/19_2.png) [@malcolm](https://forum.oscpilot.com/u/malcolm)\ **Post date:** [August 18, 2020, 2:15am UTC](https://forum.oscpilot.com/t/resolved-controlling-at-least-2-sliders-at-once-makes-oscpilot-switch-to-editing-mode/147/4 "2020-08-18T02:15:47Z")
Sure, can you send it to [support@oscpilot.com](mailto:support@oscpilot.com)? If possible your .plt file as well just so I’m using the exact same case you use. ---
**Author:** ![malcolm](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.oscpilot.com/malcolm/32/19_2.png) [@malcolm](https://forum.oscpilot.com/u/malcolm)\ **Post date:** [August 20, 2020, 1:41am UTC](https://forum.oscpilot.com/t/resolved-controlling-at-least-2-sliders-at-once-makes-oscpilot-switch-to-editing-mode/147/5 "2020-08-20T01:41:11Z")
Offline it was determined that the tablet that was being used (HP) had a gesture enabled that was causing this to occur. ---
**Author:** ![steve](https://avatars.discourse-cdn.com/v4/letter/s/f19dbf/32.png) [@steve](https://forum.oscpilot.com/u/steve)\ **Post date:** [August 20, 2020, 3:57am UTC](https://forum.oscpilot.com/t/resolved-controlling-at-least-2-sliders-at-once-makes-oscpilot-switch-to-editing-mode/147/6 "2020-08-20T03:57:11Z")
both of my windows laptops (vaio with a clean install and xps) have edge swipe gestures that seems to be preventing me from entering edit mode without tabbing. didn’t report it as a bug, as i think its just a windows laptop thing, but I’d imagine it might be a common issue. ---
**Author:** ![malcolm](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.oscpilot.com/malcolm/32/19_2.png) [@malcolm](https://forum.oscpilot.com/u/malcolm)\ **Post date:** [August 20, 2020, 4:13am UTC](https://forum.oscpilot.com/t/resolved-controlling-at-least-2-sliders-at-once-makes-oscpilot-switch-to-editing-mode/147/7 "2020-08-20T04:13:17Z")
Maybe an option to swipe down from the top left instead would be helpful? ---
**Author:** ![DrtyHvn](https://avatars.discourse-cdn.com/v4/letter/d/eb8c5e/32.png) [@DrtyHvn](https://forum.oscpilot.com/u/DrtyHvn)\ **Post date:** [August 20, 2020, 5:28am UTC](https://forum.oscpilot.com/t/resolved-controlling-at-least-2-sliders-at-once-makes-oscpilot-switch-to-editing-mode/147/8 "2020-08-20T05:28:23Z")
@steve disabling windows edge swipe through regedit (registry) might do the trick. theres a few tutorials online about it ---
**Author:** ![steve](https://avatars.discourse-cdn.com/v4/letter/s/f19dbf/32.png) [@steve](https://forum.oscpilot.com/u/steve)\ **Post date:** [August 20, 2020, 2:16pm UTC](https://forum.oscpilot.com/t/resolved-controlling-at-least-2-sliders-at-once-makes-oscpilot-switch-to-editing-mode/147/9 "2020-08-20T14:16:22Z")
thanks! the EDGE UI element wasn’t in my registry, but i did manage to disable edge swipe through group policy editor as shown in this [this tutorial](https://www.tenforums.com/tutorials/48507-enable-disable-edge-swipe-screen-windows-10-a.html) OSC/PILOT still isn’t switching from perform to edit mode when swiping, so it might be a bug. it’s only really an issue when i fold the laptop into tablet or display mode and can’t reach the TAB button