# Multiple Addresses

**URL:** <https://forum.oscpilot.com/t/multiple-addresses/582>\
**Category:** OSC/PILOT General Discussion\
**Created:** [March 10, 2022, 7:16am UTC](https://forum.oscpilot.com/t/multiple-addresses/582 "2022-03-10T07:16:58Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![VJ\_UnGG0Y](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.oscpilot.com/vj_ungg0y/32/88_2.png) [@VJ\_UnGG0Y](https://forum.oscpilot.com/u/VJ_UnGG0Y)\
**Post date:** [March 10, 2022, 7:16am UTC](https://forum.oscpilot.com/t/multiple-addresses/582/1 "2022-03-10T07:16:58Z")

</div>

Hello!

Is it possible to have a singular button interface with both OSC Pilot and an external software at the same time? I want to have a button to reset a dial to 0.0 by the press of a button, both on my other software and on OSC Pilot itself.

I’ve had to create 2 seperate buttons, 1 with OSC feedback loop on, and 1 with off to achieve the desired result. Is it possible to have this result with just 1 button? Would make my UI look much cleaner !

Big Thanks!

J

---

<div class="post-metadata">

**Author:** ![malcolm](https://yyz1.discourse-cdn.com/flex029/user_avatar/forum.oscpilot.com/malcolm/32/19_2.png) [@malcolm](https://forum.oscpilot.com/u/malcolm)\
**Post date:** [March 13, 2022, 9:36pm UTC](https://forum.oscpilot.com/t/multiple-addresses/582/2 "2022-03-13T21:36:28Z")

</div>

Ya, you can setup one of the OSC outputs (A, B, C, D, or E) to be sending to 127.0.0.1 (which is always your own machine), and use the ‘send to port’ the same as the ‘listen on port’ for the other OSC output that the other button is listening on